Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

:HARDcopy Commands 17
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 367
:HARDcopy:NETWork:DOMain
(see page 1138)
Command Syntax
:HARDcopy:NETWork:DOMain <domain>
<domain> ::= quoted ASCII string
The :HARDcopy:NETWork:DOMain command sets the Windows network
domain name.
The domain name setting is a common setting for both network printer
slots.
Query Syntax
:HARDcopy:NETWork:DOMain?
The :HARDcopy:NETWork:DOMain? query returns the current Windows
network domain name.
Return Format
<domain><NL>
<domain> ::= quoted ASCII string
See Also • "Introduction to :HARDcopy Commands" on page 358
• ":HARDcopy:NETWork:SLOT" on page 369
• ":HARDcopy:NETWork:APPLy" on page 366
• ":HARDcopy:NETWork:ADDRess" on page 365
• ":HARDcopy:NETWork:USERname" on page 370
• ":HARDcopy:NETWork:PASSword" on page 368

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English