To Next Page

To Previous Page

626 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide

26 :SAVE Commands

:SAVE:WMEMory:SOURce

(see page 1138)

Command Syntax

:SAVE:WMEMory:SOURce <source>

<source> ::= {CHANnel<n> | FUNCtion | MATH | WMEMory<r>}

<n> ::= 1 to (# analog channels) in NR1 format

<r> ::= {1 | 2}

The :SAVE:WMEMory:SOURce command selects the source to be saved as a

reference waveform file.

Query Syntax

:SAVE:WMEMory:SOURce?

The :SAVE:WMEMory:SOURce? query returns the source to be saved as a

reference waveform file.

Return Format

<source> ::= {CHAN<n> | FUNC | WMEM<r> | NONE}

See Also • "Introduction to :SAVE Commands" on page 607

• ":SAVE:WMEMory[:STARt]" on page 627

• ":RECall:WMEMory<r>[:STARt]" on page 604

NOTE

Only ADD or SUBtract math operations can be saved as reference waveforms.

NOTE

MATH is an alias for FUNCtion. The query will return FUNC if the source is FUNCtion or

MATH.

Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

Other manuals for Agilent Technologies InfiniiVision 3000 X-Series