Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

:SYSTem Commands 29
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 853
:SYSTem:DATE
(see page 1138)
Command Syntax
:SYSTem:DATE <date>
<date> ::= <year>,<month>,<day>
<year> ::= 4-digit year in NR1 format
<month> ::= {1,..,12 | JANuary | FEBruary | MARch | APRil | MAY | JUNe
| JULy | AUGust | SEPtember | OCTober | NOVember | DECember}
<day> ::= {1,..,31}
The :SYSTem:DATE command sets the date. Validity checking is performed
to ensure that the date is valid.
Query Syntax
:SYSTem:DATE?
The SYSTem:DATE? query returns the date.
Return Format
<year>,<month>,<day><NL>
See Also • "Introduction to :SYSTem Commands" on page 852
• ":SYSTem:TIME" on page 864

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English