Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

:FUNCtion Commands 16
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 341
:FUNCtion:GOFT:SOURce1
(see page 1138)
Command Syntax
:FUNCtion:GOFT:SOURce1 <value>
<value> ::= CHANnel<n>
<n>::={1|2|3|4}for4chmodels
<n> ::= {1 | 2} for 2ch models
The :FUNCtion:GOFT:SOURce1 command selects the first input channel for
the g(t) source that can be used as the input to transform or filter
functions (if available).
Query Syntax
:FUNCtion:GOFT:SOURce1?
The :FUNCtion:GOFT:SOURce1? query returns the current selection for the
first input channel for the g(t) source.
Return Format
<value><NL>
<value> ::= CHAN<n>
<n>::={1|2|3|4}forthe4chmodels
<n> ::= {1 | 2} for the 2ch models
See Also • "Introduction to :FUNCtion Commands" on page 326
• ":FUNCtion:GOFT:SOURce2" on page 342
• ":FUNCtion:GOFT:OPERation" on page 340

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Vertical Resolution	8 bits
Operating Temperature	0 °C to 50 °C
Channels	2 or 4
Display	8.5-inch WVGA (800 x 480)
Input Impedance	1 MΩ ± 1%
Trigger Modes	Edge, Pulse Width
FFT	Yes
Weight	5.5 lbs
Power Requirements	100-240 VAC, 50/60 Hz