Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

:TRIGger Commands 31
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 953
:TRIGger:USB Commands
Table 137 :TRIGger:USB Commands Summary
Command Query Options and Query Returns
:TRIGger:USB:SOURce:D
MINus <source> (see
page 954)
:TRIGger:USB:SOURce:D
MINus? (see page 954)
<source> ::= {CHANnel<n> |
EXTernal} for the DSO models
<source> ::= {CHANnel<n> |
DIGital<d>} for the MSO models
<n> ::= 1 to (# analog channels)
in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
:TRIGger:USB:SOURce:D
PLus <source> (see
page 955)
:TRIGger:USB:SOURce:D
PLus? (see page 955)
<source> ::= {CHANnel<n> |
EXTernal} for the DSO models
<source> ::= {CHANnel<n> |
DIGital<d>} for the MSO models
<n> ::= 1 to (# analog channels)
in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
:TRIGger:USB:SPEed
<value> (see
page 956)
:TRIGger:USB:SPEed?
(see page 956)
<value> ::= {LOW | FULL}
:TRIGger:USB:TRIGger
<value> (see
page 957)
:TRIGger:USB:TRIGger?
(see page 957)
<value> ::= {SOP | EOP |
ENTersuspend | EXITsuspend |
RESet}

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English