Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

832 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
28 :SEARch Commands
:SEARch:SERial:IIC:QUALifier
(see page 1138)
Command Syntax
:SEARch:SERial:IIC:QUALifier <value>
<value> ::= {EQUal | NOTequal | LESSthan | GREaterthan}
The :SEARch:SERial:IIC:QUALifier command specifies the data value
qualifier used when searching for IIC EEPROM data read events.
Query Syntax
:SEARch:SERial:IIC:QUALifier?
The :SEARch:SERial:IIC:QUALifier? query returns the current data value
qualifier setting.
Return Format
<value><NL>
<value> ::= {EQU | NOT | LESS | GRE}
See Also • Chapter 28, “:SEARch Commands,” starting on page 777
• ":SEARch:SERial:IIC:MODE" on page 827
• ":SEARch:SERial:IIC:PATTern:DATA" on page 830

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English