Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

342 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
16 :FUNCtion Commands
:FUNCtion:GOFT:SOURce2
(see page 1138)
Command Syntax
:FUNCtion:GOFT:SOURce2 <value>
<value> ::= CHANnel<n>
<n>::={1|2|3|4}for4chmodels
<n> ::= {1 | 2} for 2ch models
The :FUNCtion:GOFT:SOURce2 command selects the second input channel
for the g(t) source that can be used as the input to transform or filter
functions (if available).
Query Syntax
:FUNCtion:GOFT:SOURce2?
The :FUNCtion:GOFT:SOURce2? query returns the current selection for the
second input channel for the g(t) source.
Return Format
<value><NL>
<value> ::= CHAN<n>
<n>::={1|2|3|4}for4chmodels
<n> ::= {1 | 2} for 2ch models
See Also • "Introduction to :FUNCtion Commands" on page 326
• ":FUNCtion:GOFT:SOURce1" on page 341
• ":FUNCtion:GOFT:OPERation" on page 340

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English