Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

:TRIGger Commands 31
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 951
:TRIGger:TV:UDTV:HTIMe
(see page 1138)
Command Syntax
:TRIGger:TV:UDTV:HTIMe <time>
<time> ::= seconds in NR3 format
When the Generic video trigger's horizontal sync control is enabled, the
:TRIGger:TV:UDTV:HTIMe command sets the minimum time the horizontal
sync pulse must be present to be considered valid.
This command is available with the DSOX3VID extended Video triggering
license.
Query Syntax
:TRIGger:TV:UDTV:HTIMe?
The :TRIGger:TV:UDTV:HTIMe query returns the horizontal sync time
setting.
Return Format
<time><NL>
<time> ::= seconds in NR3 format
See Also • ":TRIGger:TV:STANdard" on page 948
• ":TRIGger:TV:UDTV:HSYNc" on page 950

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English