Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

780 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
28 :SEARch Commands
:SEARch:MODE
(see page 1138)
Command Syntax
:SEARch:MODE <value>
<value> ::= {EDGE | GLITch | RUNT | TRANsition | SERial{1 | 2}}
The :SEARch:MODE command selects the search mode.
The command is only valid when the :SEARch:STATe is ON.
Query Syntax
:SEARch:MODE?
The :SEARch:MODE? query returns the currently selected mode or OFF if
the :SEARch:STATe is OFF.
Return Format
<value><NL>
<value> ::= {EDGE | GLIT | RUNT | TRAN | SER{1 | 2} | OFF}
See Also • Chapter 28, “:SEARch Commands,” starting on page 777
• ":SEARch:STATe" on page 781

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English