To Next Page

To Previous Page

468 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide

20 :MEASure Commands

:MEASure:XMIN

(see page 1138)

Command Syntax

:MEASure:XMIN [<source>]

<source> ::= {CHANnel<n> | FUNCtion | MATH | WMEMory<r>}

<n> ::= 1-2 or 1-4 (# of analog channels) in NR1 format

<r> ::= 1-2 in NR1 format

The :MEASure:XMIN command installs a screen measurement and starts

an X-at-Min-Y measurement on the selected window. If the optional source

parameter is specified, the current source is modified.

Query Syntax

:MEASure:XMIN? [<source>]

The :MEASure:XMIN? query measures and returns the horizontal axis

value at which the minimum vertical value occurs. If the optional source is

specified, the current source is modified. If all channels are off, the query

returns 9.9E+37.

Return Format

<value> ::= horizontal value of the minimum in NR3 format

See Also • "Introduction to :MEASure Commands" on page 406

• ":MEASure:XMAX" on page 467

• ":MEASure:TMIN" on page 1071

NOTE

:MEASure:XMIN is an alias for :MEASure:TMIN.

Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

Other manuals for Agilent Technologies InfiniiVision 3000 X-Series