Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

:MEASure Power Commands 21
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 477
:MEASure:ELOSs
(see page 1138)
Command Syntax
:MEASure:ELOSs [<source>]
<source> ::= {CHANnel<n>| FUNCtion | MATH | WMEMory<r>}
<n> ::= 1 to (# analog channels) in NR1 format
<r> ::= 1-2 in NR1 format
The :MEASure:ELOSs command installs an energy loss measurement on
screen.
The <source> parameter is typically a math multiply waveform or other
waveform that represents power (voltage * current). This source can also
be specified by the :MEASure:SOURce command.
Energy loss =
 (Vds
n
* Id
n
) * sample size, where n is each sample.
Query Syntax
:MEASure:ELOSs? [<source>]
The :MEASure:ELOSs query returns the switching loss in joules.
Return Format
<return_value><NL>
<return_value> ::= the energy loss value in NR3 format
See Also • ":MEASure:SOURce" on page 444
• ":POWer:SWITch:APPLy" on page 585

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English