Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

614 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
26 :SAVE Commands
:SAVE:IMAGe:PALette
(see page 1138)
Command Syntax
:SAVE:IMAGe:PALette <palette>
<palette> ::= {COLor | GRAYscale}
The :SAVE:IMAGe:PALette command sets the image palette color.
Query Syntax
:SAVE:IMAGe:PALette?
The :SAVE:IMAGe:PALette? query returns the selected image palette color.
Return Format
<palette><NL>
<palette> ::= {COL | GRAY}
See Also • "Introduction to :SAVE Commands" on page 607
• ":SAVE:IMAGe[:STARt]" on page 610
• ":SAVE:IMAGe:FACTors" on page 611
• ":SAVE:IMAGe:FORMat" on page 612
• ":SAVE:IMAGe:INKSaver" on page 613

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English