Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

:POWer Commands 24
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 573
:POWer:SIGNals:IEXPected
(see page 1138)
Command Syntax
:POWer:SIGNals:IEXPected <value>[suffix]
<value> ::= Expected current value in NR3 format
[suffix] ::= {A | mA}
The :POWer:SIGNals:IEXPected command specifies the expected inrush
current amplitude. This value is used to set the vertical scale of the
channel probing current.
Query Syntax
:POWer:SIGNals:IEXPected?
The :POWer:SIGNals:IEXPected query returns the expected inrush current
setting.
Return Format
<value><NL>
<value> ::= Expected current value in NR3 format
See Also • ":POWer:INRush:APPLy" on page 547
• ":POWer:SIGNals:AUTosetup" on page 564
• ":POWer:SIGNals:OVERshoot" on page 574
• ":POWer:SIGNals:VMAXimum:INRush" on page 575
• ":POWer:SIGNals:SOURce:CURRent<i>" on page 581
• ":POWer:SIGNals:SOURce:VOLTage<i>" on page 582

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English