Cisco Nexus 7000 Series Reference Guide

C Commands
customer-id
97
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
customer-id
To specify a service agreement customer ID in Call home, use the customer-id command. To remove it,
use the no form of this command.
customer-id contract_id_number
no customer-id
Syntax Description
Defaults None
Command Modes Call home configuration
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to configure a service agreement customer ID in Call home:
switch(config-callhome)# customer-id Customer123456
Related Commands
contract_id_
number
Customer number for this device from the service agreement. The customer number
can be up to 255 alphanumeric characters in free format.
Release Modification
4.0(1) This command was introduced.
Command Description
callhome Places you into Call home configuration mode.
email-contact
Specifies the e-mail address of the person responsible for the device.
phone-contact Specifies the phone number of the person responsible for the device.
streetaddress Specifies the street address of the person responsible for the device.
contract-id Specifies the service agreement contract number for this device.
site-id Specifies the site ID number for this device.
switch-priority Specifies the priority number for this device.
show callhome Displays the Call home configuration.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English