Cisco Nexus 7000 Series Reference Guide

N Commands
ntp sync-retry
314
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
ntp sync-retry
To resynchronize the Network Time Protocol (NTP) with configured NTP servers, use the ntp
sync-retry command.
ntp sync-retry
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to resynchronize NTP:
switch# ntp sync-retry
Related Commands
Release Modification
4.0(1) This command was introduced.
Command Description
ntp server Configures a remote NTP server.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English