Cisco Nexus 7000 Series Reference Guide

S Commands
snmp-server location
387
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
snmp-server location
To configure the device location used by the Simple Network Management Protocol (SNMP), use the
snmp-server location command. To remove the location, use the no form of this command.
snmp-server location [location]
no snmp-server location [location]
Syntax Description
Defaults None
Command Modes Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to set the SNMP location:
switch# config terminal
switch(config)# snmp-server location SanJose
Related Commands
location (Optional) System location. The location can be any alphanumeric string up
to 255 characters.
Release Modification
4.0(1) This command was introduced.
Command Description
show snmp Displays information about SNMP.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English