Cisco Nexus 7000 Series Reference Guide

Show Commands
show snmp host
642
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show snmp host
To display the Simple Network Management Protocol (SNMP) host notification receivers, use the show
snmp host command.
show snmp host
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the SNMP hosts:
switch(config)# show snmp host
-------------------------------------------------------------------
Host Port Version Level Type SecName
-------------------------------------------------------------------
192.0.2.1 33 v1 noauth trap Comm2
-------------------------------------------------------------------
192.0.2.2 162 v3 auth trap comm3
Use VRF: Blue
-------------------------------------------------------------------
192.0.2.10 162 v3 auth trap testCommunity
Filter VRF: Red
-------------------------------------------------------------------
Release Modification
4.0(1) This command was introduced.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English