Cisco Nexus 7000 Series Reference Guide

Show Commands
show logging level
536
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show logging level
To display a logging configuration, use the show logging level command.
show logging level [level]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the current Cisco Fabric Services (CFS) logging configuration:
switch# show logging level cfs
Facility Default Severity Current Session Severity
-------- ---------------- ------------------------
cfs 3 3
0(emergencies) 1(alerts) 2(critical)
3(errors) 4(warnings) 5(notifications)
6(information) 7(debugging)
Related Commands
level (Optional) Logging configuration to display. The keyword options are listed in
the
“System Message Logging Facilities” section on page 715.
Release Modification
4.0(1) This command was introduced.
4.0(2) Added the interface-vlan, netstack, private-vlan, and ipv6 keywords.
4.1(2) Added the cfs keyword.
Command Description
logging level Configures the facility logging level.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English