Cisco Nexus 7000 Series Reference Guide

F Commands
filter vlan include-untagged
199
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
filter vlan include-untagged
To apply a VLAN access map to one or more VLANs and include untagged frames on a port with Layer
3 subinterfaces, use the filter vlan include-untagged command. To remove a VLAN access map to one
or more VLANs with untagged frames on a port with Layer 3 subinterfaces, use the no form of this
command.
filter vlan include-untagged
no filter vlan include-untagged
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Config-monitor configuration (config-monitor)
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to apply a VLAN access map to one or more VLANs and include untagged
frames on a port with Layer 3 subinterfaces:
switch(config)# monitor session 1
switch(config-monitor)# filter vlan 1-20 include-untagged
switch(config-monitor)#
This example shows how to remove a VLAN access map to one or more VLANs with untagged frames
on a port with Layer 3 subinterfaces:
switch(config-monitor)# no filter vlan 1-20 include-untagged
switch(config-monitor)#
Related Commands
Release Modification
4.0(1) This command was introduced.
Command Description
filter vlan Applies a VLAN access map to one or more VLANs.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English