Cisco Nexus 7000 Series Reference Guide

D Commands
description (SPAN)
105
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
description (SPAN)
To add a description to an Ethernet Switched Port Analyzer (SPAN) session for analyzing traffic between
ports, use the description command. To remove the description, use the no form of this command.
description description
no description
Syntax Description
Defaults None
Command Modes Monitor configuration (config-monitor)
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to add a description to a SPAN session:
switch# configure terminal
switch(config)# monitor session 3
switch(config-monitor)# description span_session_3
Related Commands
description Comment or a description of up to 32 characters that is added to a SPAN session.
Release Modification
4.0(1) This command was introduced.
Command Description
monitor session Places you into the Monitor configuration mode for configuring a SPAN
session.
show monitor session Displays the specified SPAN or ERSPAN session configuration.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English