Cisco Nexus 7000 Series Reference Guide

Show Commands
show ntp status
573
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show ntp status
To display the Network Time Protocol (NTP) distribution status, use the show ntp status command.
show ntp status
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the NTP distribution status:
switch(config)# show ntp status
Distribution : Disabled
Last operational state: No session
switch(config)#
Related Commands
Release Modification
4.1(1) This command was introduced.
Command Description
show ntp source Displays information about the NTP source.
show ntp peers Displays information about NTP peers.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English