Cisco Nexus 7000 Series Reference Guide

S Commands
system switchover
421
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
system switchover
To switch over to the standby supervisor, use the system switchover command.
system switchover
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to switch over to the standby supervisor:
switch# system switchover
switch#
Related Commands
Release Modification
4.0(1) This command was introduced.
Command Description
show system redundancy Displays the system redundancy status.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English