Cisco Nexus 7000 Series Reference Guide

E Commands
erspan-id
138
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
erspan-id
To configure the flow ID for an Encapsulated Remote Switched Port Analyzer (ERSPAN)) session, use
the erspan-id command.
erspan-id flow_id
Syntax Description
Defaults None
Command Modes config-erspan-src
Supported User Roles network-admin
network-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to configure the flow ID for an ERSPAN session:
switch# configure terminal
switch(config)# monitor session 5 type erspan-source
switch(config-erspan-src)# erspan-id 100
switch(config-erspan-src)#
Related Commands
flow_id ERSPAN flow ID. The range is from 1 to 1023.
Release Modification
5.1(1) This command was introduced.
Command Description
ip dscp Configures the DSCP value of the packets in the ERSPAN traffic.
ip ttl Configures the IP time-to-live (TTL) value of the ERSPAN traffic.
vrf Configures the VRF for ERSPAN traffic forwarding.
monitor-session Enters the monitor configuration mode for configuring an ERSPAN or
SPAN session for analyzing traffic between ports.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English