Cisco Nexus 7000 Series Reference Guide

P Commands
ptp priority2
337
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
ptp priority2
To configure the priority2 value when advertising the Precision Time Protocol (PTP) clock, use the ptp
priority2 command. To remove the priority2 value when advertising the PTP, use the no form of this
command.
ptp priority2 priority-number
no ptp priority2 priority-number
Syntax Description
Defaults 255
Command Modes Global configuration mode (config)
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to configure the priority2 value when advertising the PTP clock:
switch# configure terminal
switch(config)# ptp priority2 1
This example shows how to remove the priority2 value configuration for use when advertising the PTP
clock:
switch# configure terminal
switch(config)# no ptp priority2 1
Related Commands
priority-number Priority number. The range is from 0 to 255.
Release Modification
5.2(1) This command was introduced.
Command Description
feature ptp Enables or disables PTP on the device.
ptp source Configures the source IP address for all PTP packets.
ptp domain Configures the domain number to use for this clock.
ptp priority1 Configures the priority1 value to use when advertising this clock.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English