Cisco Nexus 7000 Series Reference Guide

P Commands
ptp domain
334
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
ptp domain
To configure a domain number for the Precision Time Protocol (PTP) clock, use the ptp domain
command. To remove the domain configuration for the PTP clock, use the no form of this command.
ptp domain domain_number
no ptp domain domain_number
Syntax Description
Defaults 0
Command Modes Global configuration mode (config)
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to configure a domain number for the PTP clock:
switch# configure terminal
switch(config)# ptp domain 6
switch(config)#
This example shows how to remove the PTP domain configuration:
switch(config)# no ptp domain 6
switch(config)#
Related Commands
domain_number Domain number. The range is from 0 to 28.
Release Modification
5.2(1) This command was introduced.
Command Description
feature ptp Enables or disables PTP on the device.
ptp source Configures the source IP address for all PTP packets.
ptp priority1 Configures the priority1 value to use when advertising this clock.
ptp priority2 Configures the priority2 value to use when advertising this clock.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English