Cisco Nexus 7000 Series Reference Guide

Show Commands
show system cores
665
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show system cores
To display the core filename, use the show system cores command.
show system cores
Syntax Description This command has no arguments or keywords.
Defaults Displays information for all features.
Command Modes Any command mode
Supported User Roles network-admin
vdc-admin
network-operator
vdc-operator
Command History
Usage Guidelines Use the system cores command to configure the system core filename.
This command does not require a license.
Examples This example shows how to display destination information for the system core files:
switch# show system cores
Cores are transferred to slot0:
Related Commands
Release Modification
4.0(1) This command was introduced.
Command Description
system cores Configures the system core filename.

Cisco Nexus 7000 Series Specifications

General

Chassis	Modular
Operating System	Cisco NX-OS
Latency	Sub-microsecond
IPv6 Support	Yes
Redundancy	Power supplies, fans, supervisors, fabric modules
Power Supply	AC or DC
Layer Support	L2, L3
Network Management	CLI, SNMP
Virtualization	VRF, vPC
Ports	10 Gigabit Ethernet, 40 Gigabit Ethernet, 100 Gigabit Ethernet, Fibre Channel, Fibre Channel over Ethernet (FCoE)
Supported Modules	Various (1G, 10G, 40G, 100G)
Features	FCoE, OTV, LISP
MPLS Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, Cisco TrustSec, Control Plane Policing (CoPP)
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0 to 40°C (32 to 104°F)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5 to 95% noncondensing
MTBF	Varies by model
Number of Slots	Varies by model (9-slot, 10-slot, 18-slot)