Cisco Nexus 7000 Series Reference Guide

S Commands
system trace
422
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
system trace
To configure a system trace level, use the system trace command. To remove the system trace level
configuration, use the no form of this command.
system trace bit-mask
no system trace [bit-mask]
Syntax Description
Defaults None
Command Modes Global configuration mode (config)
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to configure a system trace level:
switch(config)# system trace
switch(config)#
This example shows how to remove the system trace level configuration:
switch(config)# system no trace
switch(config)#
Related Commands
bit-mask Bit mask to use to change the trace level of the system.
Release Modification
4.0(1) This command was introduced.
Command Description
show cores Displays the system core files.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English