Cisco Nexus 7000 Series Reference Guide

D Commands
description (NetFlow exporter)
103
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
description (NetFlow exporter)
To add a description to a NetFlow exporter, use the description command. To remove the description,
use the no form of this command.
description line
no description [line]
Syntax Description
Defaults None
Command Modes NetFlow exporter configuration (config-flow-exporter)
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to add a description to a NetFlow exporter:
switch(config)# flow export Netflow-Exporter-1
switch(config-flow-exporter)# description Custom-Exporter-1
switch(config-flow-exporter)
This example shows how to remove the description:
switch(config-flow-exporter)# no description
switch(config-flow-exporter)
Related Commands
line Description string. The string can have a maximum of 63 alphanumeric characters.
Release Modification
4.0(1) This command was introduced.
Command Description
show flow exporter Displays information about NetFlow exporters.

Cisco Nexus 7000 Series Specifications

General

Chassis	Modular
Operating System	Cisco NX-OS
Latency	Sub-microsecond
IPv6 Support	Yes
Redundancy	Power supplies, fans, supervisors, fabric modules
Power Supply	AC or DC
Layer Support	L2, L3
Network Management	CLI, SNMP
Virtualization	VRF, vPC
Ports	10 Gigabit Ethernet, 40 Gigabit Ethernet, 100 Gigabit Ethernet, Fibre Channel, Fibre Channel over Ethernet (FCoE)
Supported Modules	Various (1G, 10G, 40G, 100G)
Features	FCoE, OTV, LISP
MPLS Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, Cisco TrustSec, Control Plane Policing (CoPP)
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0 to 40°C (32 to 104°F)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5 to 95% noncondensing
MTBF	Varies by model
Number of Slots	Varies by model (9-slot, 10-slot, 18-slot)