Cisco Nexus 7000 Series Reference Guide

D Commands
diagnostic bootup level
120
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
diagnostic bootup level
To configure the diagnostic bootup level to trigger diagnostics when the device boots, use the diagnostic
bootup level command.
diagnostic bootup level {bypass | complete}
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to configure the diagnostic bootup level:
switch(config)# diagnostic bootup level bypass
switch#
Related Commands
bypass Specifies to not perform any bootup diagnostics.
complete Displays all bootup diagnostics. The default is complete.
Release Modification
4.0(1) This command was introduced.
Command Description
show diagnostic bootup
level
Displays the diagnostic bootup level.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English