Cisco Nexus 7000 Series Reference Guide

Show Commands
show system redundancy
673
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show system redundancy
To display the system redundancy status, use the show system redundancy command.
show system redundancy [ha] status
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the system redundancy status:
switch# show system redundancy status
Redundancy mode
---------------
administrative: HA
operational: None
This supervisor (sup-1)
-----------------------
Redundancy state: Active
Supervisor state: Active
Internal state: Active with no standby
Other supervisor (sup-2)
------------------------
Redundancy state: Not present
switch#
This example shows how to display the virtual device context (VDC) redundancy status:
switch# show system redundancy ha status
VDC No This supervisor Other supervisor
------ --------------- ---------------
ha (Optional) Displays the virtual device context (VDC) redundancy status.
Release Modification
4.0(1) This command was introduced.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English