Cisco Nexus 7000 Series Reference Guide

D Commands
diagnostic test simulation clear
132
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
diagnostic test simulation clear
To clear a diagnostic test simulation for a module, use the diagnostic test simulation clear command
diagnostic test simulation module number test test-id clear
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to clear the diagnostic test simulation:
switch# diagnostic test simulation module 2 test 2 clear
switch#
Related Commands
module number Specifies the diagnostic test simulation module number. The range is from 1 to
the number of modules in the chassis.
test test-id Specifies the test ID. The range is from 1 to 15.
Release Modification
4.0(1) This command was introduced.
Command Description
diagnostic test
simulation
Simulates a diagnostic test.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English