Cisco Nexus 7000 Series Reference Guide

Show Commands
show ntp authentication-keys
563
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show ntp authentication-keys
To display the Network Time Protocol (NTP) authentication keys, use the show ntp
authentication-keys command.
show ntp authentication-keys
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the NTP authentication keys:
switch(config)# show ntp authentication-keys
-----------------------------
Auth key MD5 String
-----------------------------
3 cisco
42 Nice_Key
34567 nexus7k
switch(config)#
Related Commands
Release Modification
5.0(1) This command was introduced.
Command Description
show ntp authentica-
tion-status
Displays the status of all NTP authentication.
ntp authentication-key Configures one or more keys that a time source must provide in its NTP
packets in order for the device to synchronize to it.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English