Cisco Nexus 7000 Series Reference Guide

T Commands
test watchdog
692
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
test watchdog
To test the watchdog feature, use the test watchdog command.
test watchdog
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to test the watchdog feature:
switch(config)# test watchdog
Warning: This command will reboot the system if watchdog is functioning properly
.
Do you wish to proceed anyway? (y/n)
Related Commands
Release Modification
4.0(1) This command was introduced.
Command Description
system watchdog Enables the watchdog feature.
system no watchdog Disables the watchdog feature.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English