Cisco Nexus 7000 Series Reference Guide

Show Commands
show hardware feature-capability
490
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show hardware feature-capability
To display information about the registered features that are supported by the system, use the show
hardware feature-capability command.
show hardware feature-capability [detailed]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Usage Guidelines This command does not require a license.
Examples This example shows how to display information about the registered features that are supported by the
system:
switch# show hardware feature-capability detailed
Hardware Dependent Features:
. = supported
X = unsupported
-- Module --
7 12
VPC X X
module 7: Device Min num too small for feature
module 12: Device Min num too small for feature
PVLAN . .
switch#
Related Commands
detailed (Optional) Displays detailed information about registered features.
Release Modification
4.2(1) This command was introduced.
Command Description
show hardware
capacity
Displays information about the hardware capabilities and current hardware
utilization by the system.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English