Cisco Nexus 7000 Series Reference Guide

H Commands
hw-module logging onboard
212
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
hw-module logging onboard
To enable onboard failure logging (OBFL) based on the error type, use the hw-module logging onboard
command. To disable OBFL (not recommended), use the no form of this command.
hw-module logging onboard [counter-stats] [environmental-history] [error-stats]
[interrupt-stats] [module num] [obfl-log]
no hw-module logging onboard [environmental-history] [error-stats] [interrupt-stats] [module
num] [obfl-log]
Syntax Description
Defaults Enabled and is the recommended state.
Command Modes Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines The hw-module logging onboard command enables events to be recorded in files stored in nonvolatile
memory, so that the data can be used to diagnose problems with hardware modules installed in a Cisco
router or switch. When the onboard hardware is started up, a first record is made for each area monitored
and becomes a base value for subsequent records. This command provides a circular updating scheme
for collecting continuous records and archiving older (historical) records, ensuring accurate data about
the hardware. Data is recorded in one of two formats: continuous information that displays a snapshot
of data in a continuous file, and summary information that provides details about the data being
collected. Use the show logging onboard command to see reports of current and historical data.
Note We recommend that you do not disable OBFL.
counter-stats (Optional) Specifies the OBFL counter statistics.
environmental-history (Optional) Specifies the OBFL environmental history.
error-stats (Optional) Specifies OBFL error statistics.
interrupt-stats (Optional) Specifies OBFL interrupt statistics.
module num (Optional) Specifies OBFL information for a specific module.
obfl-log (Optional) Specifies OBFL (boot-uptime/device-version/obfl-history).
Release Modification
4.0(1) This command was introduced.
4.0(2) Added counter-stats keyword.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English