Cisco Nexus 7000 Series Reference Guide

C Commands
callhome send
34
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
callhome send
To send a Call home message to all configured destinations, use the callhome send command.
callhome send [configuration | diagnostic]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to send a Call home configuration message:
switch(config)# callhome send configuration
trying to send configuration callhome message
switch(config)#
Related Commands
configuration (Optional) Sends a configuration message.
diagnostic (Optional) Sends a diagnostic message.
Release Modification
4.0(1) This command was introduced.
Command Description
callhome Enters the Call home configuration mode.
callhome test Sends a test message to all configured Call home destinations.
show callhome Displays the Call home configuration.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English