Cisco Nexus 7000 Series Reference Guide

Show Commands
show cfs peers
439
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show cfs peers
To display all peers in the physical fabric, use the show cfs peers command.
show cfs peers [name application_name]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display all peers in the physical fabric for the Call Home application:
switch(config-callhome)# show cfs peers name callhome
Scope : Physical-fc-ip
-------------------------------------------------------------------------
Switch WWN IP Address
-------------------------------------------------------------------------
20:00:00:22:55:79:a4:c1 172.28.230.85 [Local]
switch
Total number of entries = 1
Related Commands
name
application_name
(Optional) Displays the name of a specific application.
Release Modification
4.1(2) This command was introduced.
Command Description
show application_name
session status
Displays the CFS configuration session status for the application, including
the last action, the result, and the reason if there was a failure.
show cfs application Displays information about applications that are currently enabled to use CFS
distribution.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English