Cisco Nexus 7000 Series Reference Guide

D Commands
diagnostic start
128
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
diagnostic start
To start the on-demand diagnostic test for a module, use the diagnostic start command.
diagnostic start module slot test [test-id | test-name | all | non-disruptive] [port port-number | all]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to start the on-demand diagnostic test for a module:
switch# diagnostic start module 6 test all
Related Commands
slot (Optional) Diagnostic start slot number. The range is from 1 to 10.
test Displays the diagnostic test.
test-id (Optional) Test ID. The range is from 1 to 14.
test-name (Optional) Test name. The name can be any case-sensitive, alphanumeric string up to
32 characters.
all (Optional) Displays all ports.
non-disruptive (Optional) Displays the nondisruptive tests.
port (Optional) Displays the port interface.
port-number (Optional) Interface port number.
Release Modification
4.0(1) This command was introduced.
Command Description
diagnostic stop Stops on-demand diagnostics.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English