Cisco Nexus 7000 Series Reference Guide

Show Commands
show ntp logging-status
567
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show ntp logging-status
To display the Network Time Protocol (NTP) logging status, use the show ntp logging-status command.
show ntp logging-status
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the NTP logging status:
switch(config)# show ntp logging-status
NTP logging enabled.
switch(config)#
Related Commands
Release Modification
5.0(1) This command was introduced.
Command Description
ntp logging Enables NTP logging.
show ntp authentica-
tion-status
Displays the status of NTP authentication.
show ntp session status Displays the NTP CFS distribution session information.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English