Cisco Nexus 7000 Series Reference Guide

Show Commands
show environment
464
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show environment
To display information about the hardware environment status, use the show environment command.
show environment [clock | fan | power | temperature]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
vdc-admin
network-operator
vdc-operator
Command History
Usage Guidelines You can use this command to display information about the status of the hardware on your device.
This command does not require a license.
Examples This example shows how to display information about the hardware environment:
switch# show environment
Clock:
----------------------------------------------------------
Clock Model Hw Status
----------------------------------------------------------
A Clock Module -- NotSupported/None
B Clock Module -- NotSupported/None
clock (Optional) Displays information about the clock environment.
fan (Optional) Displays information about the fan environment.
power (Optional) Displays information about the power environment.
temperature (Optional) Displays information about the temperature environment.
Release Modification
4.0(1) This command was introduced.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English