Cisco Nexus 7000 Series Reference Guide

Show Commands
show cores
450
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show cores
To display the system core files from the virtual device contexts (VDCs), use the show cores command.
show cores [vdc-all | {vdc [e-vdc2 | vdc-id | switch]}]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the system core files:
switch(config)# show cores vdc-all
VDC No Module-num Instance-num Process-name PID Core-create-tim
e
------ ---------- ------------ ------------ --- ---------------
-
1 10 1 xmlsa 32442 May 8 15:24
1 10 1 xmlsa 25163 May 9 06:04
1 10 1 xmlsa 21581 May 9 13:25
switch(config)#
vdc-all (Optional) Displays core dumps from all VDCs.
vdc Displays all core dumps for the VDC.
e-vdc2 (Optional) VDC ID number of a nondefault VDC. The range is from 1 to 8.
vdc-id (Optional) VDC ID number. The range is from 1 to 8.
switch (Optional) Displays the process core files for VDC number 1.
Release Modification
6.2(2) The switch keyword was added.
4.0(1) This command was introduced.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English