Cisco Nexus 7000 Series Reference Guide

Show Commands
show event manager history events
471
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show event manager history events
To display the Embedded Event Manager (EEM) events that have been triggered, use the show event
manager history events command.
show event manager history events [detail] [maximum number] [severity severity]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the EEM history events that have been triggered that were of severity
7:
switch# show event manager history events severity 7
switch#
detail (Optional) Displays details of all event types.
maximum number (Optional) Specifies the maximum number of history events to display.
severity severity (Optional) Displays only those events that were of the specified severity.
Release Modification
4.0(1) This command was introduced.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English