Cisco Nexus 7000 Series Reference Guide

Show Commands
show diagnostic result
459
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show diagnostic result
To display diagnostic test results for a module, use the show diagnostic result command.
show diagnostic result module {slot [test [test-id | test-name]] | all} [detail]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display a diagnostic test result:
switch# show diagnostic result module 6 test 6 detail
Current bootup diagnostic level: complete
Module 6: Supervisor module-1X (Active)
Diagnostic level at card bootup: complete
Test results: (. = Pass, F = Fail, I = Incomplete,
U = Untested, A = Abort, E = Error disabled)
______________________________________________________________________
6) NVRAM-------------------------> .
Error code ------------------> DIAG TEST SUCCESS
Total run count -------------> 1574
Last test execution time ----> Thu Jun 26 09:28:40 2008
First test failure time -----> n/a
slot Diagnostic result slot number. The module slot range is from 1 to 10.
test (Optional) Displays the diagnostic test selection.
test-id (Optional) Test ID. The range is from 1 to 14.
test-name (Optional) Test name. The test name can be any case-sensitive, alphanumeric string
up to 32 characters.
all Displays the test result for all tests on all modules.
detail (Optional) Displays the detailed result.
Release Modification
4.0(1) This command was introduced.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English