Cisco Nexus 7000 Series Reference Guide

Show Commands
show scheduler
631
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show scheduler
To display information about scheduled maintenance jobs, use the show scheduler command.
show scheduler {config | internal [mem-stats] | job [name jobname] | logfile | schedule [name
schedulename]}
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines To use this command, the scheduler must already be enabled.
To enable the scheduler, use the feature scheduler command.
This command does not require a license.
Examples This example shows how to display the scheduler configuration:
switch# show scheduler config
config terminal
feature scheduler
scheduler logfile size 16
config Displays scheduler configuration information.
internal Provides the internal scheduler information as specified.
mem-stats (Optional) Provides the scheduler internal memory information as
specified.
job Displays job information as specified.
name jobname (Optional) Displays information for the specified scheduler job name.
logfile Displays the scheduler log file as specified.
schedule Displays the scheduler timetable as specified.
name schedulename (Optional) Displays the scheduler timetable for the specified schedule
name.
Release Modification
4.0(1) This command was introduced.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English