Cisco Nexus 7000 Series Reference Guide

Show Commands
show diagnostic description module
455
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show diagnostic description module
To display information about a diagnostic test for a module, use the show diagnostic description nodule
command.
show diagnostic description module slot test {test-ID | test-name | all}
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display a diagnostic description for a module:
switch# show diagnostic description module 6 test 1
ManagementPortLoopback :
A bootup test that tests loopback on the management port of
the module
Related Commands
slot Diagnostic description slot number. The slot range is from 1 to 10.
test (Optional) Displays the diagnostic test selection.
test-ID (Optional) Test ID. The range is from 1 to 14.
test-name (Optional) Test name. The test name can be any case-sensitive, alphanumeric string
up to 32 characters.
all (Optional) Displays the test description for all tests on all modules.
Release Modification
4.0(1) This command was introduced.
Command Description
show diagnostic
content
Displays diagnostic test names and test IDs.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English