Cisco Nexus 7000 Series Reference Guide

A Commands
action overbudgetshut
11
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
action overbudgetshut
To configure the shutdown of a module or the entire switch due to an overbudget power condition when
an Embedded Event Manager (EEM) applet is triggered, use the action overbudgetshut command. To
remove the shutdown configuration, use the no form of this command.
action label overbudgetshut [module module]
no action label overbudgetshut [module module]
Syntax Description
Defaults None
(The default action is to powerdown just the linecards starting from slot_1 till the switch recovers from
overbudget condition. In other words, skip both the supervisors (active and standby) and skip all
spine/xbars, powerdown lcs starting from slot 1 onwards, till the "Available" power recovers from
overbudget condition).
Command Modes Embedded event manager
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command does not require a license.
label Unique identifier that can be any string value. Actions are sorted and run in an
ascending alphanumeric sequence using the label as the sort key. If the string
contains embedded blanks, enclose it in double quotation marks.
module module (Optional) Forces a shutdown of the specified module.
For 9slot : The range is from 1 to 9.
For 10slot : The range is from 1 to 10.
For 18slot : The range is from 1 to 18.
Release Modification
4.0(1) This command was introduced.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English