Cisco Nexus 7000 Series Reference Guide

Show Commands
show sampler
630
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show sampler
To display a NetFlow sampler, use the show sampler command.
show sampler [name] [sampler-name]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines You can create a sampler to define the NetFlow sampling rate for a flow.
This command does not require a license.
Examples This example shows how to display a NetFlow sampler:
switch(config)# show sampler
Sampler Netflow-Sampler-1:
mode 1 out-of 1000
switch(config)#
Related Commands
name (Optional) Specifies a sampler.
sampler-name (Optional) Sampler name. The maximum number of characters is 32.
Release Modification
4.0(1) This command was introduced.
Command Description
sampler Configures a sampler to collect data for a user selected packet ratio to
preserve hardware resources.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English