Cisco Nexus 7000 Series Reference Guide

S Commands
snmp-server contact
375
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
snmp-server contact
To configure the Simple Network Management Protocol (SNMP) contact information, use the
snmp-server contact command. To remove the contact information, use the no form of this command.
snmp-server contact [contact-info]
no snmp-server contact [contact-info]
Syntax Description
Defaults A zero-length string
Command Modes Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines Use the snmp-server contact command to configure the SNMP sysContact variable.
This command does not require a license.
Examples This example shows how to configure the SNMP contact:
switch# configure terminal
switch(config)# snmp-server contact Jane Smith@anyplace.com
Related Commands
contact-info (Optional) SNMP contact information (sysContact). The name can be any
alphanumeric string up to 255 characters.
Release Modification
4.0(1) This command was introduced.
Command Description
show snmp Displays information about SNMP.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English