EasyManuals Logo

Cisco Nexus 7000 Series Reference Guide

Cisco Nexus 7000 Series
746 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #378 background imageLoading...
Page #378 background image
R Commands
record netflow ipv4
350
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
record netflow ipv4
To select an IPv4 record for the NetFlow monitor, use the record netflow ipv4 command. To remove the
record selection, use the no form of this command.
record netflow ipv4 {original-input | original-output | protocol-port}
no record netflow ipv4 {original-input | original-output | protocol-port}
Syntax Description
Defaults None
Command Modes NetFlow monitor configuration (config-flow-monitor)
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to select a NetFlow IPv4 record for the NetFlow monitor:
switch(config)# switch(config)# flow monitor newflow1
switch(config-flow-monitor)# description recordflow
switch(config-flow-monitor)# record netflow ipv4 original-input
switch(config-flow-monitor)#
This example shows how to remove the NetFlow IPv4 record selection:
switch(config-flow-monitor)# no record netflow ipv4 original-input
Related Commands
original-input Specifies the traditional IPv4 input NetFlow.
original-
output
Specifies the traditional IPv4 output NetFlow.
protocol-port Specifies the protocol and ports aggregation scheme.
Release Modification
4.0(1) This command was introduced.
Command Description
show flow sw-monitor Displays information about NetFlow monitors.

Table of Contents

Other manuals for Cisco Nexus 7000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Nexus 7000 Series and is the answer not in the manual?

Cisco Nexus 7000 Series Specifications

General IconGeneral
ChassisModular
Operating SystemCisco NX-OS
LatencySub-microsecond
IPv6 SupportYes
RedundancyPower supplies, fans, supervisors, fabric modules
Power SupplyAC or DC
Layer SupportL2, L3
Network ManagementCLI, SNMP
VirtualizationVRF, vPC
Ports10 Gigabit Ethernet, 40 Gigabit Ethernet, 100 Gigabit Ethernet, Fibre Channel, Fibre Channel over Ethernet (FCoE)
Supported ModulesVarious (1G, 10G, 40G, 100G)
FeaturesFCoE, OTV, LISP
MPLS SupportYes
Quality of Service (QoS)Yes
Security FeaturesACLs, Cisco TrustSec, Control Plane Policing (CoPP)
DimensionsVaries by model
WeightVaries by model
Operating Temperature0 to 40°C (32 to 104°F)
Storage Temperature-40°F to 158°F (-40°C to 70°C)
Humidity5 to 95% noncondensing
MTBFVaries by model
Number of SlotsVaries by model (9-slot, 10-slot, 18-slot)

Related product manuals