Cisco Nexus 7000 Series Reference Guide

R Commands
record netflow-original
352
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
record netflow-original
To select an input IPv4 record, use the record netflow-original command. To remove the record
selection, use the no form of this command.
record netflow-original
no record netflow-original
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes NetFlow monitor configuration (config-flow-monitor)
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to select an IPv4 input record:
switch(config)# flow monitor Custom-NetFlow-Monitor-1
switch(config-flow-monitor)# record netflow-original
switch(config-flow-monitor)#
This example shows how to remove the record selection:
switch(config-flow-monitor)# no record netflow-original
switch(config-flow-monitor)#
Related Commands
Release Modification
4.0(1) This command was introduced.
Command Description
show flow sw-monitor Displays information about NetFlow monitors.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English